Vast Inventory for Fast Shipping. Custom Builds Available, Rentals and Sales. Most items in stock for fast shipping!! UPS Ship Map Credit cards & Paypal Accepted
Made in the USA The EXP-EMG-EXT-12W-2L Explosion Proof Emergency Light with backup emergency battery and exit sign from Larson Electronics is rated Class 1 Division 1 Class II Division I & II and is an ideal emergency lighting solution for hazardous locations where failsafe lighting reliability…
Made in the USA The EPL-EMG-EXT-3W-EMB Explosion Proof LED Exit Sign with backup emergency ballast from Larson Electronics is rated Class 1 Division 1 Class II Division I & II and is an ideal emergency exit marking solution for hazardous locations where failsafe reliability is a must. The exit…
…operates on voltages of 100-277V AC and provides 100,000 hours of reliability and up to 76% savings compared to traditional 175 watt metal halide canopy light fixtures. This canopy LED features a battery back-up for up to 90 minutes of light in emergency situations. The popular LEDHCL-EMG-450-WCM…
…Operation: The EXP-EMG-LE6-1L features a backup battery that will run the fixture for at least 90 minutes following a power outage or any other loss of power. The included emergency backup battery is a 3.6 volt NiCad rechargeable unit. These batteries are maintenance-free and have a life expectancy…
Made in the USA The EXP-EMG-EXT-LE6-1L Explosion Proof LED Exit Sign with emergency batterybackup from Larson Electronics is Class I, Divisions 1 & 2, Groups A, B, C, D, Class I, Zones 1 & 2, Groups IIB+H2, IIA, Class II, Divisions 1 & 2, Groups E, F, G and Class III Divisions 1 &…
Made in the USA The EXP-EMG-EXT-LE6-1L-V2 Explosion Proof LED Exit Sign with emergency batterybackup from Larson Electronics is Class I, Divisions 1 & 2, Groups A, B, C, D, Class I, Zones 1 & 2, Groups IIB+H2, IIA, Class II, Divisions 1 & 2, Groups E, F, G and Class III Divisions 1…
Made in the USA The EPL-EMG-EXT-3W Explosion Proof LED Exit Sign with backup emergency ballast from Larson Electronics is rated Class 1 Division 1 Class II Division I & II and is an ideal emergency exit marking solution for hazardous locations where failsafe reliability is a must. The exit sign…
…mount fixture features three 24-watt T5HO lamps and a micro-perforated steel diffuser to soften the light. An emergency battery backup is built-in that runs one lamp for up to 90 minutes, or until normal power is restored. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION…
…by the continual evaluation of the battery`s condition. The charge rate may be as minimal as 0.2 A during typical float up to the full 2.5 A for more deeply discharged batteries. This variable float charge ensures optimal charge rate is applied to the battery. Unique and patented pulse technology…
…a simple push button located on the back of the unit. Dimensions for this beacon are 7.25 inches long by 3.75 inches high. This strobe flashes once per second, is visible for up to 3 miles, and runs for 40, and up to 120 hours, on a single set of 4 AA batteries. The durability, portability and high…
…a simple push button located on the back of the unit. Dimensions for this beacon are 7.25 inches long by 3.75 inches high. This strobe flashes once per second, is visible for up to 3 miles, and runs for 40, and up to 120 hours, on a single set of 4 AA batteries. The durability, portability and high…
…the battery once electrical power is restored. Standard configuration includes a single emergency ballast that will run a single lamp at 1350 lumens for 90 minutes. For an additional charge, a second ballast can be added to run a second lamp for 2700 total lumens output for 90 minutes. The battery…
…for 90 minutes at 900 lumens once the main electrical power to the light is severed. Once standard electrical power is restored, the emergency battery pack will be recharged. We have eliminated the ballast normally associated with fluorescent fixtures, which allows for instant on operation. The…
Made in the USA The EXP-EMG-EXT-12W-1LX Explosion Proof Emergency Exit Light with backup emergency battery from Larson Electronics is rated Class 1 Division 1 Class 2 Division 1 & 2 and is an ideal emergency lighting solution for hazardous locations where failsafe lighting reliability is a…
…visibility and detection during emergency situations. This emergency exit light features a battery backup system for continuous operation during emergencies. A sealed 3.7VNiCad battery provides up to 90 minutes of backup and will automatically recharge within 24 hours via an internal, solid-state…
…operates on voltages of 110-277V AC and provides 100,000 hours of reliability and up to 76% savings compared to traditional 175 watt metal halide canopy light fixtures. This canopy LED features a battery back-up for up to 90 minutes of light in emergency situations. The popular LEDHCL-LP-EMG-450-WCM…
…spare battery and accessory vehicle coil cord with cigarette plug. Spare batteries are available and easily changed by unscrewing the round screw on tail cap at the back of the light to accesses the battery which slides out. A second battery can be used while another discharged battery is charging.…
…of reliability and up to 87% savings compared to traditional 400 watt metal halide wall pack fixtures. In the event of a power failure or power outage, this LED wall washer fixture will operate for a minimum of 90 minutes at 50% lumen output due to the included emergency battery backup.The popular…
…light tower includes two 265 watt solar panels, solar charging system, battery bank and manual crank up mast mounted on trailer with outriggers. This 0.53KW solar generator system replenishes amp hours of usable battery capacity per day, assuming 5.5 hours of peak charging sunlight. This system…
…light tower includes two 265 watt solar panels, solar charging system, battery bank and manual crank up mast mounted on trailer with outriggers. This 0.53KW solar generator system replenishes amp hours of usable battery capacity per day, assuming 5.5 hours of peak charging sunlight. This system…
…spare battery and accessory vehicle coil cord with cigarette plug. Spare batteries are available and easily changed by unscrewing the round screw on tail cap at the back of the light to accesses the battery which slides out. A second battery can be used while another discharged battery is charging.…
…can occur in electrical systems which would otherwise result in burning up or premature LED failure without it. The inline transformer then steps down the input voltage to 24V DC to power the LED light. External Battery Backup: The LED light comes with an emergency backup feature, which operates…
…lithium ion battery and has a runtime of 4 hours on high and 8 hours on low. The ergonomic, no-slip handle can be used for handheld carrying or as an adjustable hook to the hang the lamp in an overhead position. The LED lamp is affixed to a trunnion bracket that permits both front to back tilting…
…doubles as a hook which allows the fixture to be hung as an overhead light. Battery/Charging:The rechargeable 3.7V 3600mAh lithium ion battery powers this light for up to 1.5 hours on high and 3 hours on low. The RL-17-LED-M-CPR is shipped with both a USB charger and a car charger. Recharging from a…
…surge protection and a 90 minute internal emergency battery backup. The HAL-EMG-48-60W-ITG-LED is designed to accommodate a variety of mounting options include swivel brackets, wall and ceiling brackets, or beam clamps. The slot back design of the lamp allows multiple mounting access points…
…floodlight includes a carrying handle, a rechargeable 3.7V/3600mA lithium battery, and a magnetic base for for quick and easy on-the-go mounting. A uniquely designed articulated light head allows for front to back adjustment over a 180° range. This light is impact and vibration resistant,…
…independent operation. This infrared LED light tower is powered by a rechargeable lithium-ion battery pack. In a fully charged state, the power cells can sustain all six lamps for 12+ hours. The 160aH battery pack comes with an integrated charger and a rugged travel case. Unlike low-quality infrared…
…support independent operation. This LED light tower is powered by a rechargeable lithium-ion battery pack. In a fully charged state, the power cells can sustain all six lamps for 12+ hours. The 160aH battery pack comes with an integrated charger and a rugged travel case. Unlike low-quality infrared…
…in diameter and 3.5 inches deep. - On/off toggle switch located on the back of the lamp housing controls power to the lamp. - Detachable cord options include 16 foot cord with cigarette plug, 21 foot cord with spring battery clamps, 21 foot cord with 3/8 inch ring terminals, 10 foot coil cord with…
…double sided, and can be seen from both sides and featurres a emergency battery for failsafe operation. The HAL-EMG-EXT-3W is an effective option for operators who wish to ensure their hazardous workspaces employ the most up to date and reliable means of marking exit-ways available. Under normal…
…a 90 minute internal emergency battery backup. The HAL-EMG-48-60W-ITG-LED-M-25C-EPP is designed to be magnetically mounted to flat, ferrous surfaces. The fixture is equipped with two magnets, each with 200lb of gripping force, attached to adjustable legs on the back of the fixture. The adjustable…
…ion battery pack provides over 50 minutes of runtime and high impact nylon and unbreakable polycarbonate construction provides light weight operation and extreme durability. This lightweight, ultra rugged, ergonomic handheld Larson Electronics spotlight operates on an internal lithium ion battery…
…canopy light fixtures. This canopy LED features a battery back-up for up to 90 minutes of light in emergency situations. The popular LEDHCL-EMG-250-WCM traditional medium LED canopy light from Larson Electronics features an emergency batterybackup and is designed to replace more fragile and energy…
Made in the USA The EXP-EMG-EXT-LE6-1L-IAE Explosion Proof LED Exit/KELUAR Sign with emergency batterybackup from Larson Electronics is Class I, Divisions 1 & 2, Groups A, B, C, D, Class I, Zones 1 & 2, Groups IIB+H2, IIA, Class II, Divisions 1 & 2, Groups E, F, G and Class III…
Made in the USA The EXP-EMG-EXT-LE6-2L-RH Explosion Proof LED Exit Sign with emergency batterybackup and a remote light head from Larson Electronics is Class I, Divisions 1 & 2, Groups A, B, C, D, Class I, Zones 1 & 2, Groups IIB+H2, IIA, Class II, Divisions 1 & 2, Groups E, F, G and…
Made in the USA The Larson Electronics SL-BM-R Magnetic Mount Beacon is battery powered and provides up to 120 hours of operation on a single set of 4 AA batteries. This LED Beacon is 100% portable, has a bolt-on/bracket mount base, and provides a highly effective alternative to beacons that require…
Made in the USA The Larson Electronics SL-BM-B Bolt-on Surface/Bracket Mount Beacon is battery powered and provides up to 120 hours of operation on a single set of 4 AA batteries. This LED Beacon is 100% portable, has a bolt-on/bracket mount base, and provides a highly effective alternative to…
Made in the USA The Larson Electronics SL-BM-G Bolt-on Surface/Bracket Mount Beacon is battery powered and provides up to 120 hours of operation on a single set of 4 AA batteries. This LED Beacon is 100% portable, has a bolt-on/bracket mount base, and provides a highly effective alternative to…
Made in the USA The Larson Electronics SL-BM-W Bolt-on Surface/Bracket Mount Beacon is battery powered and provides up to 120 hours of operation on a single set of 4 AA batteries. This LED Beacon is 100% portable, has a bolt-on/bracket mount base, and provides a highly effective alternative to…
…industrial operations where durability and reliability is critical.This battery powered LED light tower comes with a regarcheable battery pack and one single charge can last up to 8 hours a of use. The 90 amp hour batteryback mounted at the base of the tower provides ample run time, making this…
…red lettering helps improve visibility and detection. The LED fixture features a battery backup system for continuous operation during emergencies. A sealed 9.6V maintenance-free nickel cadmium battery provides up to 90 minutes of backup and will automatically recharge within 24 hours via an…
…temperature of 5,000K in a flood beam configuration. The LED fixture features a battery backup system for continuous operation during emergencies. A sealed 3.6V maintenance-free nickel cadmium battery provides up to 90 minutes of backup and will automatically recharge within 24 hours via an…
…The unit is powered by either a 12 volt source plug in cigarette adapter or by 4 `C` alkaline batteries. The 12V plug in allows for illumination without wasting any of the battery life. Whereas the batteries allow the operator to disconnect the unit from the 12V source whenever needed, while still…
…up to 79% savings compared to traditional 250 watt metal halide garage light fixtures. This LED features a battery back-up for up to 90 minutes of light in emergency situations. The popular LEDVCPL-EMG-550-WCM vandal resistant LED garage light from Larson Electronics features an emergency battery…
…that can stand up to rough conditions and treatment. The hard case acts as a base for camera operations and storage for the thermal camera monitor, battery, remote controls and camera. The case includes handles and solid no-slip wheels, which lets the operator tilt the unit back and roll/transport…
…DC Charger 120V AC Charger Battery Level Indicator Click Images to Enlarge Battery/Charging: The WAL-TP-RPS-3XLED-CPR draws power from an internal lithium-ion 200WH battery system. The battery system is robust enough to provide up to 7,000 lumens of light output and up to 24 hours of continuous run…
…LED headlight produces an intense light beam while providing up to 16 hours of illumination. Two high intensity CREE LEDs mounted within an impact resistant housing is powered by 3 AAA batteries to produce a long lived light beam of up to 160 lumens in output. Included with this explosion proof…
…spare battery and accessory vehicle coil cord with cigarette plug. Spare batteries are available and easily changed by unscrewing the round screw on tail cap at the back of the light to accesses the battery which slides out. A second battery can be used while another discharged battery is charging.…
…light tower includes two 265 watt solar panels, solar charging system, battery bank and manual crank up mast mounted on trailer with outriggers. This 0.53KW solar generator system replenishes amp hours of usable battery capacity per day, assuming 5.5 hours of peak charging sunlight. This system…
…light tower includes two 265 watt solar panels, solar charging system, battery bank and manual crank up mast mounted on trailer with outriggers. This 0.53KW solar generator system replenishes amp hours of usable battery capacity per day, assuming 5.5 hours of peak charging sunlight. This system…
…light tower includes two 265 watt solar panels, solar charging system, battery bank and manual crank up mast mounted on trailer with outriggers. This 0.53KW solar generator system replenishes amp hours of usable battery capacity per day, assuming 5.5 hours of peak charging sunlight. This system…
…lumens of white light in a flood beam configuration. The LED fixture features a battery backup system for continuous operation during emergencies. A sealed 3.6V maintenance-free nickel cadmium battery provides up to 90 minutes of backup and will automatically recharge within 24 hours via an…
…and up to 76% savings compared to traditional 175 watt metal halide garage light fixtures. This canopy LED features a battery back-up for up to 90 minutes of light in emergency situations. The popular LEDRCPL-EMG-450-WCM LED garage light from Larson Electronics features an emergency battery backup…
…polycarbonate (lens), the LED strip fixture is compatible with universal 120-277V AC voltages. This LED light comes with a battery backup system, ensuring single-lamp operation for up to 90 minutes during power outages and emergencies. The GAU-ID-EMG-48-2L-LED-G3 is an energy efficient and powerful…
…semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly…
