1-800-369-6671 or 903-498-3363 (Military/Intl Sales - 214-616-6180)
Free UPS Ground Shipping on List Price Orders Over $100 in Domestic US (Not HI/AK/CAN) Most items in stock for fast shipping!! UPS Ship Map Credit cards & Paypal Accepted
…explosionproof disconnect switch/breaker provides operators with a Class I and II, Division 1 and 2 cast aluminum enclosure that provides overcurrent and short circuit protection for service entrance, feeder or branch circuits, lighting, heating, appliance and motor circuits. This explosionproof…
ExplosionProof On/Off Tumbler Switch. Feed-Through Tumbler switch, front-operated; Dust-ignition proof fixture. 20 Amp Rated. This particular unit is rated at 20 amps and accepts currents ranging from 120-277VAC. The wiring hub is offered in 1/2" or 3/4" and the unit is a feed through model. The…
The Larson Electronics EPCS-PBS-3PS.LOA-PTM-PLG ExplosionProofControl Station is suitable for busy operations in hazardous locations. Featuring four drilled and tapped operator holes, the unit supports several control mechanisms for heavy-duty machines. An emergency stop pushbutton, three-position…
The Larson Electronics EPCS-PBS-3PS.FOR-PLG ExplosionProofControl Station is suitable for busy operations in hazardous locations. Featuring three drilled and tapped operator holes, the unit supports several control mechanisms for heavy-duty machines. An emergency stop pushbutton, three-position…
The Larson Electronics EPCS-PBS-3PS.LOA-PLG ExplosionProofControl Station is suitable for busy operations in hazardous locations. Featuring three drilled and tapped operator holes, the unit supports several control mechanisms for heavy-duty machines. An emergency stop pushbutton, three-position…
The Larson Electronics EPCS-PBS-3PS.LOM-PTM-PLG ExplosionProofControl Station is suitable for busy operations in hazardous locations. Featuring four drilled and tapped operator holes, the unit supports several control mechanisms for heavy-duty machines. An emergency stop pushbutton, three-position…
The Larson Electronics EPCS-PBS-3PS.HOA-PLG ExplosionProofControl Station is suitable for busy operations in hazardous locations. Featuring three drilled and tapped operator holes, the unit supports several control mechanisms for heavy-duty machines. An emergency stop pushbutton, three-position…
Explosionproof enclosure with Love temperature control system. The end user provides control voltage through the second NPT. The power flows to the Love controller and then to the appliance via the 20 amp explosionproof outlet. Temperature sensing cables supplied by end user are passed through…
ExplosionProof Elbow Conduit This explosionproof elbow conduit makes a 90 degree bend to allow conduit service entrance into buildings, provide conductor entrance to motors, and provide access to wiring for maintenance and future system changes. Features:- Cover openings on an angle, allowing…
…recessed to avoid accidental contact and will not be energized by non explosionproof plugs to preserve explosionproof protection in hazardous environments. Ordinary location plugs will NOT activate this explosionproof receptacle. The iron housing is finished in a triple-coat zinc electroplate,…
The EPD-DC-1G is an aluminum device cover blank. This cover is compatible with Larson Electronics EPD-DB-1G-D explosionproof device box. Ratings for this cover include: Class I, Divisions 1 & 2, Groups C, DClass l, Zones 1 & 2, Groups llB, IIAClass II, Divisions 1 & 2, Groups E, F,…
The EPL-BS-25WRE-100 from Larson Electronics is an explosionproof portable LED light useful for illuminating hard to reach areas or outdoor locations where portability is key. This portable LED light offers operators with 2,750 lumens while drawing only 25 watts. The LED light head, which operates…
Made in the USA The EXP-WRL-TRSM-MTR ExplosionProof Remote for the EPL-TL-2X10W-C-EXWR Signal Light is a battery powered, wireless remote control is designed to give operators the ability to more accurately monitor and manage the traffic flow at industrial refueling stations as well as the process…
…colors, the operator simply presses the push button at the top of the device. The explosionproof wireless remote for this receiver can be found here: EXP-WRL-TRSM-MTR ExplosionProof Wireless Remote Control See a demo of the complete light, remote and receiver package here: EPL-TL-2X10W-C-EXWR…
…an ExplosionProof Pilot Light that is rated for Class I, Divisions 1 & 2, Groups B, C, D, Class II, Divisions 1 & 2, Groups E, F, G and Class III, Divisions 1 & 2 hazardous areas. This explosionproof pilot light operates on 240 volts and has color options. The EPL-PL-240-RG explosion…
ExplosionProof Conduit Box with Surface Mounting Tabs Surface mounting tabs for easy installation. Copper-free aluminum body and cover provides resistance to corrosive atmospheres External cover thread on body and smooth hub bushing helps to protect conductor insulation when pulling. Covers and…
ExplosionProof Junction Box Universal design with two threaded universal hubs Copper-free aluminum body and cover provide resistance to corrosive atmospheres Internally threaded body and externally threaded cover with O-ring for rain tight fit, NEMA 3 and 4. Covers have pry notches for bar or…
ExplosionProof Junction Box Universal design with two threaded universal hubs Copper-free aluminum body and cover provide resistance to corrosive atmospheres Internally threaded body and externally threaded cover with O-ring for rain tight fit, NEMA 3 and 4. Covers have pry notches for bar or…
…temperature rating of 10° to 40°C. This fan is rated for single phase 115/230V 60Hz and operates at 1,140 RPM. A built-in explosionproof switch offers convenient on/off control of the EPF-30-PM-SW. A cast aluminum junction box houses the fan motor and allows for electrical connections to the fan.…
…kit for EPF-AC-30 series evaporative coolers (does NOT include fan assembly). Kit includes water tank, aluminum frame assembly, water pump with controls, on/off switch and power cord. This kit can be used to replace the base stand for EPF-AC-30 series coolers or to convert the WAF-AC-BS-30 portable…
…Electronics EPO-25A explosionproof power outlet provides a durable and secure weatherproof power connection for portable or stationary electrical devices and equipment in locations where equipment is susceptible to wet and corrosive environments. This 20 amp rated explosionproof power outlet is…
Made in the USAThe EPL-TL-2X10W-C-EXWR ExplosionProof LED Signal Light simplifies traffic routing and process management while increasing worksite safety with a side by side lamp configuration and the inclusion of a wireless explosionproof remote control. This LED signal light and remote package…
The Larson Electronics EXP-TSTAT-120.480-86F explosionproof thermostat is designed for temperature control in industrial facilities where flammable gases, vapors or dust are or may be present. This device is adjustable using a set point knob system, which is powered by an SPDT snap action switch.…
…selectrion and control for motors and equipment in hazardous locations. This explosionproof starter switch is ideal for operators seeking a high quality explosionproof starter switch rated for use in hazardous areas designated Class 1 Division 1 and Class 2 Division 1. This explosionproof switch…
…Electronics is an ExplosionProof Selector Switch that is suitable for preventing the ignition of external, flammable atmospheres in hazardous locations. This 600V-rated unit features a long barrel design for installation in thick panels measuring up to 1.5". The explosionproof device supports a…
The EPSW-3PH-60 Three Phase ExplosionProof Switch by Larson Electronics is a non-fused disconnect unit for motor circuits in hazardous locations. This device comes with the following explosionproof ratings: Class I, Div. 1 & 2 (Groups B, C, D); Class l, Zones 1 & 2 (Groups llB+ H2, llA);…
…in size. This explosionproof enclosure is ideal for indoor or outdoor applications where flammable vapors, gases, or dusts exist or stand the potential to exist. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO EXPLOSIONPROOF ENCLOSURES* The EPL-AEB-12.12.8 explosionproof enclosure is made…
Made in the USA The Larson Electronics EPS-PB10-MS-AT ExplosionProof Push Button Momentary Switch is ideal for controlling motors and devices in hazardous locations. This unit comes with an adjustable time delay relay, at a range of 2-30 seconds. Constructed of malleable iron and aluminum, this…
1” Explosionproof seal off is used to make a junction between an explosionproof lights and rigid pipe. Typically, users will make their connections, keep the conductors separate and pour chico into the seal off.
1.5” Explosionproof seal off is used to make a junction between an explosionproof lights and rigid pipe. Typically, users will make their connections, keep the conductors separate and pour chico into the seal off.
1” Explosionproof seal off is used to make a junction between an explosionproof lights and rigid pipe. Typically, users will make their connections, keep the conductors separate and pour chico into the seal off.
…4" in size. This explosionproof enclosure is ideal for indoor or outdoor applications where flammable vapors, gases, or dusts exist or stand the potential to exist. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO EXPLOSIONPROOF ENCLOSURES* The EPL-AEB-8.8.4 explosionproof enclosure is made…
…from Larson Electronics is a replacement dimmer rotor switch assembly for the EXP-DRW explosionproof dimmable rotary switch. This replacement rotor switch assembly mounts inside the explosionproof enclosure of the EXP-DRW. The EXP-DRW-SP0003 is a 0-10V dimmer switch assembly with purple…
…in size. This explosionproof enclosure is ideal for indoor or outdoor applications where flammable vapors, gases, or dusts exist or stand the potential to exist.*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO EXPLOSIONPROOF ENCLOSURES*The EPL-AEB-60.22.12 explosionproof enclosure is made…
…EPO-100A ExplosionProof Receptacle with Disconnect Switch provides a durable and secure power connection for portable or stationary electrical devices and equipment in locations where equipment is exposed to flammable chemicals, vapors and dusts. This 100 amp rated explosionproof receptacle…
The CHICO-SPS-6OZ ExplosionProof Sealing Compound is designed for electrical conductors in hazardous locations. This sealing compound separates and forms an explosionproof seal around each conductor and helps to restrict the passage of gases, vapors or flames through the sealed fitting. The…
…is an ExplosionProof Selector Switch that is suitable for preventing the ignition of external, flammable atmospheres in hazardous locations. This 600V-rated unit features a short barrel design with maintained operation and supports three positions (left, center, right). The explosionproof device…
…ExplosionProof motion sensor is approved Class 1 Division 1 & 2 and Class 2 Division 1 & 2 and the ability to power lights or other equipment within hazardous locations based on motion triggers. This explosionproof motion sensor is ideal for operators seeking a high quality explosionproof…
The EPSW-3PH-100 Three Phase ExplosionProof Switch by Larson Electronics is a non-fused disconnect unit for motor circuits in hazardous locations. This device comes with the following explosionproof ratings: Class I, Div. 1 & 2 (Groups B, C, D); Class l, Zones 1 & 2 (Groups llB+ H2, llA);…
…as chemical plants, oil refineries and settings where combustible gases or dust may be present. This 10-amp device features the following explosionproof ratings: Class I Divisions 1 and 2; and Class II Divisions 1 and 2. Device box and switch cover sold separately. Features: The EPS-PB10-SP0002…
…circuit breaker spaces (maximum). Taking on a 3-pole 4-wire configuration, the explosionproof panel board consists of two, 15-amp branch breakers. The main breaker amp rating on this unit is 100 amps. This explosionproof panelboard is constructed of copper-free aluminum, while the cover bolts are…
The EXP-PHOTOCELL from Larson Electronics is an ExplosionProof Photocell that functions as a day/night sensor for HID, incandescent and fluorescent luminaries. The 400-watt rated unit automates dusk-to-dawn lighting controls by turning on compatible lights at 3 footcandles and off at 8 footcandles.…
…Main lug only 225-amp (4) 15-amp GFCI protected branch circuit breaker with operating handle for explosionproof panelboards(1) Class I, Division 1 & 2 and Class II, Division 1 & 2 explosionproof enclosure Ratings:Class I Groups B, C, DClass II Groups E & GClass III Class I Zone 1, AE x…
…message sales@larsonelectronics.com for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information HLSW-FDS-SS-16A-2X0.75 ExplosionProof Disconnect Switch Features/Ratings Unit Type: ExplosionProof Disconnect Switch Class I, Div
The HLSW-CS-2X2PSW-6XMS from Larson Electronics is a Non-Metallic ExplosionProof Switch for hazardous environments. This ATEX-certified unit features two, 2-position selector switches and six momentary push buttons. The assembly supports a din rail mount design and is constructed of an impact…
…use in petroleum refineries, chemical plants, petrochemcial plants and other facilities where similar conditions exist. The HLSW-PB20-2PSW has explosion protected contact blocks that are rated for voltages up to 690V AC, is capable of handling 20 amps for switching duty and has a horsepower rating…
…and use in petroleum refineries, chemical plants, petrochemcial plants and other facilities where similar conditions exist. The HLSW-PB20-MS has explosion protected contact blocks that are rated for voltages up to 690V AC, is capable of handling 20 amps for switching duty and has a horsepower rating…
…use in petroleum refineries, chemical plants, petrochemcial plants and other facilities where similar conditions exist. The HLSW-PB20-MMS has explosion protected contact blocks that are rated for voltages up to 690V AC, is capable of handling 20 amps for switching duty and has a horsepower rating…
Explosionproof straight blade plug with 12 inches of 14/3 wire and junction box. Designed to replace non-explosion proof plugs on equipment. 120 Volt AC and Class 1 Division 1 UL rated.
Explosionproof straight blade plug with 36 inches of 14/3 wire and junction box. Designed to replace non-explosion proof plugs on equipment. 120 Volt AC and Class 1 Division 1 UL rated.
Explosionproof seal off is used to make a junction between an explosionproof lights and rigid pipe. Available in half inch and 3/4 inch hub sizes. Typically, users will make their connections, keep the conductors separate and pour chico into the seal off.
Explosionproof straight blade plug with 30 feet of 14/3 wire and junction box. Designed to replace non-explosion proof plugs on equipment. 120 Volt AC and Class 1 Division 1 UL rated. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge
…deep recessed to avoid accidental contact and will not be energized by non explosionproof plugs to preserve explosionproof protection in hazardous environments. Ordinary location plugs will NOT activate this explosionproof receptacle. This EPO-250-2P-20A power outlet features a top-hinged cover…
The EPS-2XPB-SG-MS-SP0000 ExplosionProof Push Button Switch Cover has been designed for use with theEPS-2XPB-SG-MS ExplosionProof Start/Stop Switch. This cover is comprised of a durable aluminum face plate, as well as, both start/stop switches. The device box is NOT included. Please choose color…
