Vast Inventory for Fast Shipping. Custom Builds Available, Rentals and Sales. Most items in stock for fast shipping!! UPS Ship Map Credit cards & Paypal Accepted
…combination of gases to produce light,light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and…
…run time); - flashing strobe mode. Another unique feature of this LED light is the burst mode, which increases the high beam intensity to a range of 165 feet for as long as the operator presses the burst button. The lighthead is adjustable, so operators can set an angle appropriate for the job. LED…
Replacement HID LightHead Assembly for Post / Roof Mount Spotlights - Housing, Lens, Lamp, Ballast Complete replacement lighthead assembly for replacing damaged/faulty HID lightheads on existing post mount or roof mount spotlights equipped with 35 watt HID lightheads. Replacement head includes…
…Mount Indoor 6V LightHead from Larson Electronics is designed for use with emergency exit signs. This indoor lamp head is equipped with a 6 volt PAR36 bulb. The GAU-RMLH-PAR36-6V-7.2W is constructed of a thermoplastic housing for impact and corrosion resistance. The lamp head articulates, allowing…
Made in the USA The GAU-RMLH-PAR36-6V-7.2W-WP Remote Mount Waterproof 6V LightHead from Larson Electronics is designed for use with emergency exit signs. This weatherproof lamp head is fully gasketed and equipped with a 6 volt PAR36 bulb. The GAU-RMLH-PAR36-6V-7.2W-WP is constructed of a…
Fluorescent bulk headlight ideal for accommodation spaces, indoor areas, anywhere a low profile fluorescent light with UL 1598A would be needed. Fixtures are supplied class P ballast with an automatic thermally protective device. This fixture includes a 15-amp outlet and on/off switch. IP65 rated.…
…combination of gases to produce light,light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and…
…to adjust the angle and placement of the lighthead in any direction. A single retractable cord provides power from the battery to the LED lighthead. Other configurations are available for higher powered spot and flood beams. For example, this LED light can be configured with our LED10W-6R for 5.5…
This is a replacement LED module, it`s the full LED lighthead for the HL-85-LED-CPR handheld spotlight. It works with the HL-85-LED-CPR series spotlights as well.
…Stadiums, Speedways, Storage Areas, Public Parks and Mobile Lighting. Specifications / Additional Information HID-22-SL-REM-105 1000 Watt Metal Halide LightHead Features Lamp Type: Metal Halide U.L. Rated Dimensions: 19" - Diameter (LightHead) 23" H Operates on 120-277 Volts AC or 480 Volts AC…
…Stadiums, Speedways, Storage Areas, Public Parks and Mobile Lighting. Specifications / Additional Information HID-22SL-15M-REM-105 1500 Watt Metal Halide LightHead Features Lamp Type: Metal Halide U.L. Rated Dimensions: 19" - Diameter (LightHead) 23" H Operates on 120-277 Volts AC or 480 Volts AC…
…LED area light produces 5,400 lumen of light while drawing only 60 watts of power. The RNT-WAL-PM-WP60 work area LED light provides a 5,400 lumen floodlight beam and is a direct replacement for hot and fragile 500 watt halogen work lights. This portable LED work light is comprised of a lighthead…
…head for the HAL-PRM-400W-MH metal halide hazardous area light fixture. The HAL-PRM-400W-MH-SP0000 is a replacement for damaged or otherwise compromised lamp heads on the HAL-PRM-400W-MH metal halide light fixture. This replacement head does NOT include a replacement mount. It is a replacement head…
Powder coated steel pole top mounting bracket with pre-drilled holes for up to 4 LEDP-5w-30 LED lightheads. Available with slip-fitter mount with T-handle set screw to be placed over existing round or square pole top tubing (customer must specify) Includes junction box for up to 4 connections, and…
1500 Watt Work Area Light runs on 120 volts. 8 foot telescoping metal tripod with adjustable legs that can be leveled on uneven surfaces. Two headed lamp systems. Each lamp contains a 250 watt halogen and 500 watt halogen bulb. Each lighthead is equipped with a switch. The two switches enables the…
…an LED lighthead measuring 16 inches in diameter. The LED lighthead on this unit produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and large job sites where portable lighting is required.This portable LED work light is comprised of a 16 inch LED lighthead…
…LED light cart is comprised of one 70 watt LED lighthead and an adjustable, removable bracket mounted atop a solid rubber wheeled cart fabricated from non sparking aluminum. Transferring the unit through manholes consists of simply removing the lighthead from the cart, passing the lighthead and…
…watt LED lighthead measuring 18 inches in diameter. The LED lighthead on this unit produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and large job sites where portable lighting is required.This portable LED work light is comprised of a 18 inch LED lighthead…
…work light provides 9,500+ square feet of work area coverage with 12,500 lumens of light output. This portable LED light is mounted to a lightweight aluminum base and has an LED lighthead measuring 16 inches in diameter. The LED lighthead on this unit produces a brilliant flood pattern of light…
…work light provides 9,500 square feet of work area coverage with 21,000 lumens of light output. This portable LED light is mounted to a lightweight aluminum frame and has an LED lighthead measuring 16 inches in diameter. The LED lighthead on this unit produces a brilliant flood pattern of light…
…is an LED lighthead retrofit bracket for metal halide light plants. This bracket allows operators to retrofit existing metal halide plants to accept the GAU-LTL-500W-LED light fixtures offered by Larson Electronics. Designed and built to be durable, as well as easy to install, these LED lighthead…
Replacement LightHead LED Assembly Board for EXP-EMG-2L-LE6 Explosion Proof Bug Eye LED Fixtures Does not include enclosure - LED assembly / board only
…to adjust the angle and placement of the lighthead in any direction. A single retractable cord provides power from the battery to the LED lighthead. Other configurations are available for higher powered spot and flood beams. For example, this LED light can be configured with our LED10W-6R for 5.5…
Articulating Light Mast Head Extension Bracket - 4` Side Extension - Pivoting Adjustment. Set pin holes for horizontal adjustment spaced every 3" with (20) 9/16" pre-drilled set holes. 4`-6.25" long arm. 1` T-style mast head. Designed for 3/8" set bolts/pins Articulating mount for lights or…
…XLE-SLH-16XLTL Light Tower Head Assembly Frame provides stable mounting for 16 of our GAU-LTL-500W-LED fixtures. At full capacity with lights installed, the entire system weighs an estimated 1,000 lbs. The XLE-SLH-16XLTL is a sturdy mounting solution for LED light towers. The light tower head…
…XLE-SLH-32XLTL Light Tower Head Assembly Frame provides stable mounting for 32 of our GAU-LTL-500W-LED fixtures. At full capacity with lights installed, the entire system weighs an estimated 1,866 lbs. The XLE-SLH-32XLTL is a sturdy mounting solution for LED light towers. The light tower head…
…DO NOT APPLY TO LIGHT MASTS, LIGHT TOWERS, OR QUADPODS* The EPL-BS-161M-TP1-200 is a tripod mounted explosion proof LED light and provides 8,000 square feet of work area coverage with 10,000 lumens of light output. This portable LED tripod light has a removable LED lighthead measuring 16 inches…
…an LED lighthead measuring 16 inches in diameter. The LED lighthead on this unit produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and large job sites where portable lighting is required.This portable LED work light is comprised of a 16 inch LED lighthead…
…LED light that provides 10,000 square feet of work area coverage with 17,500 lumen of light output.This portable LED cart light has a removable 150 Watt lighthead measuring 16" by 14". The slim wheelbarrow cart mount and low profile LED lighthead allows operators to pass the tank cleaning light…
…This particular unit is ultra compact measuring at 6.7" OD lamp head and 8.82" tall with the mounting bracket, which makes it ideal for applications where electrical power and mounting space is at a premium. The LED WRE series LED lights are waterproof to 3 meters, sealed against intrusion by dust…
…intensity. The LED lighthead measures 8.25 inches long by 5.25 inches high. The LED lighthead on this unit produces a brilliant flood pattern of light that is ideal for work area and temporary lighting applications.This portable LED work light is comprised of a lighthead mounted atop a base…
…position the lighthead as needed, such as in security applications or film and entertainment applications. The mounting assembly is configured to accept 5/8", 3/4" or 1" mounting studs. Please choose size below. Specifications / Additional Information WAL-STL-400W-LED-STM High Mast LED Light Quick…
…and efficient halogen or HID loading bay and dock lights. This Class 1 Division 2 hazardous location dock light provides 2334 lumens of high quality light while drawing only 31 watts. The copper free aluminum alloy body of the LED lighthead is powder coated for added durability and an attractive…
…and efficient halogen or HID loading bay and dock lights. This Class 1 Division 2 hazardous location dock light provides 2334 lumens of high quality light while drawing only 60 watts. The copper free aluminum alloy body of the LED lighthead is powder coated for added durability and an attractive…
…area light produces 5,400 lumen of light while drawing only 60 watts of power. The WAL-PM-WP60 work area LED light provides a 5,400 lumen floodlight beam and is a direct replacement for hot and fragile 500 watt halogen work lights. This portable LED work light is comprised of a lighthead mounted…
…makes this lamp an excellent loading bay dock light. This Class 1 Division 2 hazardous location dock light provides 36,000 lumens of high quality light while drawing only 400 watts. The copper free aluminum alloy body of the metal halide lighthead is powder coated for added durability and an…
…This particular unit is ultra compact measuring at 6.7" OD lamp head and 8.82" tall with the mounting bracket, which makes it ideal for applications where electrical power and mounting space is at a premium. The LED WRE series LED lights are waterproof to 3 meters, sealed against intrusion by dust…
…and width from a single light source. This particular unit is ultra compact at 4.5" OD lamp head, 5.75 inches tall with mounting bracket, which makes it ideal for applications where electrical power and mounting space is at a premium. The LED WRE series LED lights are waterproof to 3 meters,…
…bright light while drawing less than 8 amps from a 12 volt electrical system. A single CREE 90 watt LED producing 5950 lumen is combined with high output reflector to produce a narrow 10 degree spread spot beam approximately 3250’ long. This particular unit is ultra compact at 8.7" OD lamp head,…
…lighting. The flood beams are designed to provide more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. An included disconnect allow operators to remove the lighthead from the top of the mast to safely transport it. J12196 lights…
…bright light while drawing less than 2.25 amps from a 12 volt electrical system. A single CREE 25 watt LED producing 2,750 lumens is combined with a high output reflector to produce a narrow 10° spread spot beam approximately 1000’ long. This particular unit is ultra-compact at 4.5" OD lamp head,…
…to adjust the angle and placement of the lightheads in any direction. A single retractable cord provides power from the battery to the LED lighthead. Other configurations are available for higher powered spot and flood beams. For example, this LED light can be configured with our LED10W-6R for 5.5…
…lamp heads are only a few of this lights` features. The durability and power of this rechargeable portable light tower make it ideal for applications including emergency services, utility work, hazardous locations and more. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS, LIGHT…
…mount lights come in a standard floodlight configuration to provide more light over a larger area nearer the fixture, making them ideal for use as dedicated work and area lights. These units produce 2,924 lumens, and will illuminate an area 15,000+ square feet in size. The LED heads on these…
…to adjust the angle and placement of the lightheads in any direction. A single retractable cord provides power from the battery to the LED lighthead. Other configurations are available for higher powered spot and flood beams. For example, this LED light can be configured with our LED10W-6R for 5.5…
…mounted to the tower via hinges which allow operators to adjust the angle and placement of the lightheads in any direction. A single retractable cord provides power from the battery to the LED lighthead. Other options include more powerful LEDs and spotlight or floodlight configurations. Contact…
…to the tower via hinge brackets which allow operators to adjust the angle and placement of the lightheads in any direction. A single retractable cord provides power from the battery to the LED lighthead. Other options include more powerful LEDs and spotlight or floodlight configurations. Contact…
…*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS, LIGHT TOWERS, OR QUADPODS* This single LED light tripod is fitted with an LED lighthead that produce 3,600 lumens while using 60 watts at 0.5 amps. The LED lighthead contains twenty Edison Edixeon® Emitters producing 180 lumens…
…VDC. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS, LIGHT TOWERS, OR QUADPODS* This single LED light tripod is fitted with an LED lighthead that produce 10,320 lumens while using 120 watts at 1 amp. The LED lighthead contains twelve CREE XLamp MC-E® Emitters producing 860…
…and width from a single light source. This particular unit is ultra compact at 4.5" OD lamp head, 5.75 inches tall with mounting bracket, which makes it ideal for applications where electrical power and mounting space is at a premium. The LED WRE series LED lights are waterproof to 3 meters,…
